SOLUTION FOR GAS UTILITIES
Your network's gas consumption, in data that supports decisions.
Group Link One turns gas metering into continuous consumption data on the platform. The utility gains point-by-point visibility into the network, catches deviations and fraud early, and reduces unbilled gas, using the meters already in the field.
THE INDUSTRY'S CHALLENGE
The gas network needs visibility that a monthly reading can't give.
Without continuous data, the utility only sees the network once a month, at the billing cycle reading. In that window, fraud, metering failures and deviations build up and only surface once they've already become a loss on the balance sheet.
Manual reading still carries heavy field costs, is prone to human error and does not build the dense history needed to compare, forecast and audit the consumption of each point.
Unbilled losses
Network deviations and fraud result in gas delivered without matching billing.
Expensive manual reading
Monthly reading routes concentrate operating cost and are prone to human error and delay.
Metering failures
Meters with precision drift distort the real consumption at each point of the network.
Little network visibility
Without a continuous history, it's hard to spot consumption patterns or critical points in time.
TELEMETRY OVER THE INSTALLED FLEET
A smart layer over the meter you already have
GL Utilities devices install easily onto existing meters and send consumption continuously over the GL One Network, with anomaly alarms and direct integration into the utility's systems, expanding management visibility across the entire installed gas meter fleet.
Compatible with the main brands
Integrates with the leading gas meter manufacturers on the market, with no need to replace the equipment already installed.
Consumption and integrity alarms
The platform triggers alerts for the team when consumption strays from the pattern or there's a sign of tampering at the metering point.
Platform or integration via MQTT/Batch
Data stays on the Group Link One platform or is integrated into the utility's own systems via MQTT or Batch.
ACTIVE MONITORING
The device detects, the platform notifies, the team acts.
The platform cross-references the consumption history and flags every out-of-pattern condition, also for the gas devices (MITR and Pulse).
Continuous Consumption
Detects abnormal continuous consumption that may indicate a leak in the system.
Magnetic Attack
Detects the presence of an external magnetic field near the device, indicating a possible fraud attempt.
Removal
Detects movement or displacement of the device relative to its original mounting point.
Excessive Flow
Detects flow above the configured maximum limit.
Oversizing
Detects when flow is systematically below the expected minimum, indicating a water meter oversized for the actual consumption profile.
Undersizing
Detects when flow is systematically above the expected maximum, indicating a water meter undersized for the actual consumption profile.
No Consumption
Detects a prolonged absence of consumption, which may indicate a stopped device, fraud, or a stuck water meter.
No Communication
Detects devices that have stopped sending readings, indicating a possible communication failure, critical battery, or an inoperative device.
Low Battery
Detects battery level below the configured threshold, allowing preventive action before communication is lost.
Out of Average
Detects when a device's daily consumption deviates significantly from its own historical pattern, indicating a possible leak, fraud, reading failure, or change in behavior.
END-USER ENGAGEMENT
A direct channel with whoever consumes the gas.
Beyond managing the network, the solution connects the utility to the end consumer, who tracks their own consumption and is warned before a problem grows.
Consumption tracking
The user views their own consumption history over time and compares it to the expected pattern.
Personalized alerts
The user receives alerts about deviations in their own point's consumption.
Critical consumption notices
The user is notified when their point's consumption exceeds what's expected or shows signs of an anomaly.
DEVICES FOR GAS
Compatibility that keeps up with your operation
The device choice depends on the type of gas meter installed. Our technical team validates compatibility with your fleet.
Water & GasGL Utilities Water & Gas MITR
GL-MIV204
Hybrid device for water and gas meters from the leading manufacturers. QR Code setup, estimated autonomy of up to 10 years.
See device page
GL Utilities Pulse
GL-WGV210
Device for gas meters with pulse output. Connects to the meter's outputs and sends consumption continuously to the platform.
See device pageCONNECT WITH YOUR SYSTEMS
Integrates with what the utility already uses.
The solution doesn't replace the operation's infrastructure, but connects to it through the main channels.
Group Link One Platform
For those who won't integrate with their own systems, the platform delivers complete consumption management.
Integration via MQTT
Consumption data flow to the utility's systems, for proactive action on failures and anomalies.
Batch integration
Batch data delivery to the operator's billing and management systems.
NEXT STEP
See the solution applied to your gas network.
Our technical team assesses your utility's scenario and shows how telemetry applies to your meter park, with no obligation.
