Continuous Consumption
Detects abnormal continuous consumption that may indicate a leak in the system.
GL ONE · IOT SENSORS
The GL Utilities Pulse transforms water and gas meters with pulse output into a source of continuous consumption data. Reading no longer depends on field visits and reaches the platform, where it becomes the basis for reducing losses, identifying fraud, and anticipating decisions. Communication at 2.4 GHz over the GL One Network.
Continuous telemetry reveals where consumption deviates from expected, helping identify physical losses, fraud, and metering errors before they turn into balance losses. The team acts on the exact point, not the average.
Instead of one reading per month, the platform receives data every 5 minutes and builds a dense consumption history. This history supports projection, comparison, and audit, giving concrete grounds for every decision in the operation.
The device integrates with already installed pulse-output, reed switch, and ultrasonic meters, with no need to replace the fleet. The operation gains telemetry over what's already in the field, with quick setup via QR Code.
A hybrid device for water and gas, compatible with bulk meters, ultrasonic meters with pulse output, and reed switch meters, the Pulse integrates pulse conversion and telemetry into a single device, with continuous transmission to the platform.
0 years
Estimated autonomy
0m
Open-field range*
0 min
Transmission interval
0g
Weight
IP68
Protection
2.4GHz
Bluetooth frequency
+19.5dBm
Transmission power
Pulse output · Reed switch · Ultrasonic
Compatible types
GL ONE · SPECIFICATIONS
Active monitoring
Through the Group Link One platform, you can configure alarms based on the reality of your operation. Each alarm identifies a specific condition before it turns into a loss, cross-referencing consumption data and turning every reading into an actionable alert.
Detects abnormal continuous consumption that may indicate a leak in the system.
Detects the presence of an external magnetic field near the device, indicating a possible fraud attempt.
Detects flow in the opposite direction to the meter's normal operating direction.
Flow equal to or greater than 10 m³/h for at least 30 seconds.
Detects when flow is systematically below the expected minimum, indicating a water meter oversized for the actual consumption profile.
Detects when flow is systematically above the expected maximum, indicating a water meter undersized for the actual consumption profile.
Detects a prolonged absence of consumption, which may indicate a stopped device, fraud, or a stuck water meter.
Detects devices that have stopped sending readings, indicating a possible communication failure, critical battery, or an inoperative device.
Detects battery level below the configured threshold, allowing preventive action before communication is lost.
Detects when a device's daily consumption deviates significantly from its own historical pattern, indicating a possible leak, fraud, reading failure, or change in behavior.
OUR IOT SENSORS
NEXT STEP
Our technical team assesses compatibility with the pulse-output meters in your operation and recommends the best deployment path, with no commitment.
Talk to a specialist
MANIFESTO GL ONE®